Waiting for DC start conditions > Start cond. not met
The feed-in conditions for the utility grid are not yet fulfilled.
Corrective measures:
RNWBL Service Line
Related Articles
- Event Number - (101-105) - Grid Voltage High
- Event Number - (202-206) - Utility Grid Disconnect
- Event Number - (401-404) - Grid Disconnect , Change in Power Frequency
- Event number - 501 - Power Frequency Error
- Event Number - 601 - Excessive DC in Grid
- Event Number - 701 - Power Frequency Error
- Event Number - 1001 - L & N Connection Swap
- Event Number - 1302 - L & N Not Connected
- Event Number - 1501 - Value/Country Data Error
- Event Number - (3301-3303) - DC Input Low power
- Event Number - (3401-3407) - DC Overvoltage
- Event Number - 3501 - Insulation Error
- Event number - 3601 - High Discharge Current
- Event Number - 3701 - Residual Current High
- Error Number - 3801 - DC Overcurrent
- Event Number - 4301 - Electric Arc Detected
- Event Number - 6512 - Minimum Temperature Error
- Event Number - (6701-6702) - Communication Disturbance
- Error Number - 6803 - Input A Failure
- Error Number - 6903 - Input B Failure
- Event Number - 7106 - Update File Failure
- Event Number - 7110 - Update File Not Found
- Error Number - 7112 - Update File Copied
- Event Number - 7113 - The memory card is full or write-protected
- Event Number - 7303 - Main CPU Update Failure
- Event Number - 7324 - Update Connection Failure
- Event Number - 7331 - Update Transport Started
- Event Number - 7332 - Update Transport Successful
- Event Number - 7333 - Update Transport Failure